@SpyderTracks Just checked OverClockers and they are out of Cryofuel do you think this would be ok as an alternative? https://www.overclockers.co.uk/mayhems-x1-clear-premixed-watercooling-fluid-1l-wc-035-mh.html
Its the same brand as the coolant I currently have.
Hi There, I've got a liquid cooled machine with a custom loop with two radiators. It cools the CPU and two GPUs. Over time the liquid has evaporated and I think its probably due a flush out and servicing. However in the mean time (use the machine for work) can I top up with premix coolant for...
Hi All update, Got sent a replacement PSU connected it all up and nadda, must be the Mobo or something else as of yet undiagnosed. Getting to be a bit of a joke TBH, not had a working machine since early Feb. PCS dont do call outs but I am loath to send such a big heavy machine back to them for...
Many thanks Ill check that out. The machine was purchased end of 2019 so I think the manufacture date should be ok. Its odd as it was running fine for a year previusly but then ...issues?
Hey, Yes Ive tried changing leads, it was plugged straight into the wall but I've tried plugging it into surge protected Multi tap to no avail. Power is getting through but Just sounds like something is 'tripping' inside the PSU? Tech suppourt has suggested sending a new PSU to see if that does...
Hey @NoddyPirate many thanks for the suggestion, I have turned the PSU power switch on and off when I reseated the GPU's and just now for the RAM sticks.
I've tried one 16 Gig Stick on a couple of different slots and still the same issue.
R.e the heat issue, I would say its in the center of...
Thanks for your response however I can't start my machine atm to find a dump file. I try taking some of the sticks of RAM out and see if that makes a difference?
I wonder if its the MOBO / PSU? The amount of heat was such that the side of the glass panel was quite hot to the touch. I would have...
@SpyderTracks @ubuysa any thoughts at all? I have finally heard from Tech supourt but it still at the 'have you tried waggling wires' stage. Wires waggled but still no cigar. (not actually waggled unplugged and plugged in again)
😔
Same is happening to me, i.e the machine powers on for a split second and then powers off, after having run fine for a few hours already? Bizarre? Be interested to see how your issue pans out
The Machine seemed to be running fine for a day so I decided to see if windows needed to be reinstalled or not as I've installed a lot and didn't relish having to reinstall windows again and go through the laborious process if it wasn't necessary.
Then while playing a game (Apex) the machine...
No Worries I get it, tbh i'll probably just do a clean reinstall for windows instead of messing about with drivers and what not.
I'll report back when i've done that.
Many thanks