You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
15.6" Cosmos II Flickering screen lines on screen
- Thread starter KaranB
- Start date
D
Distinct
Guest
It is a loose LVDS cable. Yes there is a way to attempt fixing it. You can take the panel off of the bottom of the case and re seat the LVDS cable if you have the knowledge to do so but it is probably on the display side and that I can not advise you to do and I would say return it to us.
It is a loose LVDS cable. Yes there is a way to attempt fixing it. You can take the panel off of the bottom of the case and re seat the LVDS cable if you have the knowledge to do so but it is probably on the display side and that I can not advise you to do and I would say return it to us.
Thanks for the quick reply. I will check the cable on the motherboard. However how much would it be for me to send the laptop back to you?
Thanks again
Last edited:
D
Distinct
Guest
I will give it a go hahaha -
Turn the laptop upside down and make sure you have the hinges facing away from you so we are looking in the same place.
Remove the the bottom panel from the machine by removing the screws and the panel should slide off if you push away from you
You will see a black fan surrounded by a silver housing. The connector is here -
http://imgur.com/k8qc7cO
The image is super bad quality but there is only one connector in that area so you will see it.
Turn the laptop upside down and make sure you have the hinges facing away from you so we are looking in the same place.
Remove the the bottom panel from the machine by removing the screws and the panel should slide off if you push away from you
You will see a black fan surrounded by a silver housing. The connector is here -
http://imgur.com/k8qc7cO
The image is super bad quality but there is only one connector in that area so you will see it.
I will give it a go hahaha -
Turn the laptop upside down and make sure you have the hinges facing away from you so we are looking in the same place.
Remove the the bottom panel from the machine by removing the screws and the panel should slide off if you push away from you
You will see a black fan surrounded by a silver housing. The connector is here -
http://imgur.com/k8qc7cO
The image is super bad quality but there is only one connector in that area so you will see it.
Okay I checked the cable on the motherboard and it seems solid. Luckily problem hasnt showed up today so I wont send it in, gotta use it next few days. Maybe after that. Thanks a lot for the help.