Mitchtenn96
Active member
Hello guys my new desktop arrived and it turns on but I can’t get a signal to monitor? Any ideas? (I should add I’ve plugged it into the graphics card like the booklet says)
It might also be as simple as the Monitor is on the wrong output mode. It's easy to make simple mistakesHello guys my new desktop arrived and it turns on but I can’t get a signal to monitor? Any ideas? (I should add I’ve plugged it into the graphics card like the booklet says)
Can you upload a picture of the back of the pc with all the wires connected?No beeps occur and nothing seems to be loose inside. Literally just getting the no signal screen on my tv and a blank screen on my monitor. Honestly I’m a complete novice when it comes to pcs and not sure if trying to take it out myself is a good idea haha 😂
CaseWhat are your full specs from the order page?
Haha no worries 😂 & here you goSorry about that, back on topic now!
First things first, can you take a photo of the cables that go into the side of the GPU inside the case?
Need to know if it's 2 individual cables, or a splitter connecting to both ports.
So can you identify if it’s 2 individual cables running from the PSU or a splitter?Haha no worries 😂 & here you go
Judging by the cable ties it is 2 individual cablesSo can you identify if it’s 2 individual cables running from the PSU or a splitter?
To me it looks like a splitter as I can only see one cable running towards the gpu, looks like they’ve just tied up the splitter portion of it?Judging by the cable ties it is 2 individual cables
Ok, when you have it powered on, are there any lights lit at point 7 in the top right on this diagram? If so, what colours and which ones?To me it looks like a splitter as I can only see one cable running towards the gpu, looks like they’ve just tied up the splitter portion of it?
That looks like this section to me, correct me if I’m wrong. Atm only the vga light is lit white. Although earlier the boot light was lit in a green I believe, and I’ve noticed at times the cpu light flash red for a second and then go off again.Ok, when you have it powered on, are there any lights lit at point 7 in the top right on this diagram? If so, what colours and which ones?
View attachment 22525
It does appear to be primarily GPU related then.That looks like this section to me, correct me if I’m wrong. Atm only the vga light is lit white. Although earlier the boot light was lit in a green I believe, and I’ve noticed at times the cpu light flash red for a second and then go off again.
That’s unfortunate if the gpu is dead. Will uninstalling it and reinstalling it void the warranty? Cause obvs I don’t want that however I also don’t want to send the whole build back hahaIt does appear to be primarily GPU related then.
I would try uninstalling the GPU fully and then slotting it back in just as a final check, but it's very possible the card is dead and needs swapping out.
If you're ok doing that (it's very easy), then you have the possibility of RMA'ing just the GPU rather than the whole machine. In that instance, it's very possible PCS will just be able to post you a replacement GPU for next day.
If you have to send the whole thing back, it's a pain and can take a while.
Yeah unfortunately I’ve tried them both individually on my monitor and tv also tried all ports and different cables but no luck 😩It might not be related but I see you wrote, Monitor and TV. Have you always tried it with both connected at the same time?
Just asking as I had trouble with no signal when I first got mine after connecting it to the TV, was fine just with the monitor. But with both monitor and TV connected everything would turn on but just a black screen on both screens.
Wasn't until I sorted the screen settings out that it finally worked on both screens.