BSOD with random stop codes

P

PetSaw

Member
Hi,
I am getting frequent BDOS events. This can happen at anytime and does not appear to be linked to any app or game I am using.
All drivers are up to date and windows 11 is also up to date.
I have tried to update my bios, but it will not load any of the drivers I have tried from Gigabyte.
Specs below

Case
FRACTAL FOCUS G BLACK GAMING CASE (Window)
Processor (CPU)
Intel® Core™ i9 Ten-Core Processor i9-10850K (3.6GHz) 20MB Cache
Motherboard
GIGABYTE B560M DS3H (rev. 1.0) : LGA1200, DDR4, USB 3.2
Memory (RAM)
16GB Corsair VENGEANCE DDR4 2666MHz (4 x 4GB)
Graphics Card
6GB NVIDIA GEFORCE GTX 1660 Ti - HDMI, DP - GeForce GTX VR Ready!
1st M.2 SSD Drive
250GB SAMSUNG 970 EVO PLUS M.2, PCIe NVMe (up to 3500MB/R, 2300MB/W)
1st Storage Drive
1TB PCS 2.5" SSD, SATA 6 Gb (520MB/R, 470MB/W)
DVD/BLU-RAY Drive
NOT REQUIRED
Power Supply
CORSAIR 450W CV SERIES™ CV-450 POWER SUPPLY
Power Cable
1 x 1 Metre UK Power Cable (Kettle Lead)
Processor Cooling
PCS FrostFlow 120 Series RGB High Performance Liquid Cooler
Thermal Paste
ARCTIC MX-4 EXTREME THERMAL CONDUCTIVITY COMPOUND
Sound Card
ONBOARD 6 CHANNEL (5.1) HIGH DEF AUDIO (AS STANDARD)
Network Card
10/100/1000 GIGABIT LAN PORT
USB/Thunderbolt Options
MIN. 2 x USB 3.0 & 2 x USB 2.0 PORTS @ BACK PANEL + MIN. 2 FRONT PORTS
Operating System
Windows 11 Home 64 Bit - inc. Single Licence [KUK-00003]

BIOS Version/Date American Megatrends International, LLC. F3 PI, 03/11/2021

Any help would be appreciated
 
SpyderTracks

SpyderTracks

We love you Ukraine
The cooler is nowhere near suitable for the CPU, and the PSU is far too low also.

I'm not really surprised it's unstable.

You can check thermals by applying a 100% load with Prime95 and have HWMonitor open and take readings after 10 minutes WHILE THE STRESS TEST IS STILL RUNNING

GIMPS - Free Prime95 software downloads - PrimeNet

GIMPS has free software available for Windows, Linux, FreeBSD, Mac OSX. Contribute to the effort by using your computer's spare processing power.
www.mersenne.org www.mersenne.org

www.cpuid.com

HWMONITOR | Softwares | CPUID

HWMonitor for Windows® x86/x64 is a hardware monitoring program that reads PC systems main health sensors : voltages, temperatures, powers, currents, fans speed, utilizations, clock speeds ... The program handles : CPU and GPU-level hardware monitoring...
www.cpuid.com www.cpuid.com


Did you clean install windows after you'd used the driver updater previously?

BSOD

Hi, my PC has recently started suffering from the dreaded BSOD, I have completely re-installed windows 11 and ran a driver update and still the problem persists. System specs are Case FRACTAL FOCUS G BLACK GAMING CASE (Window) Processor (CPU) Intel® Core™ i9 Ten-Core Processor i9-10850K...
www.pcspecialist.co.uk www.pcspecialist.co.uk
 
N

Nat9320

Bronze Level Poster
If you want to update your BIOS it’s best to get specific instructions from PCS otherwise you may invalidate your warranty.
 
P

PetSaw

Member
I have run the test and the CPU temps were up to 100 degrees.
I do not use any driver update software since doing a clean install.
What cooler spec would you recommend?
 
SpyderTracks

SpyderTracks

We love you Ukraine
PetSaw said:
I have run the test and the CPU temps were up to 100 degrees.
I do not use any driver update software since doing a clean install.
What cooler spec would you recommend?
Click to expand...
You’d need an H115 or H150i on that CPU, but the case can only support an H115i mounted on the front.

What process did you go through to clean install?
 
SpyderTracks

SpyderTracks

We love you Ukraine
PetSaw said:
I downloaded windows 11 from Microsoft and and re-installed after completely removing every thing from my PC, so it was a completely clean install
Click to expand...
Ok, I'd suspect it hasn't actually been clean installed as you aren't able to outline what process you did.

I would address the cooling and PSU, then clean install.
 
You must log in or register to reply here.
Top