Sudden slow down of PC (Nvidia card not being utilized?)

connmal

Active member
Also here is a screenshot of device manager, I think this is what you wanted?
 

Attachments

  • device manager screenshot.png
    device manager screenshot.png
    943.2 KB · Views: 173

connmal

Active member
It looks like I didnt have my chip set drivers. Should I do a windows reinstall again and install all these properly? I think you're right I buggered up the driver installation when I reinstalled windows
 

barlew

Godlike
It looks like I didnt have my chip set drivers. Should I do a windows reinstall again and install all these properly? I think you're right I buggered up the driver installation when I reinstalled windows
I would start from scratch. Especially as you installed that Driver fix. You don't know what it's done.
 

barlew

Godlike
I wont lie to you I have no idea what the tongfang chipset drivers are or where to find them. Do you just mean the drivers on the download area on pc specialist site for my laptop?

Also here is the HWmonitor screenshot from fire strike.
And this confirms it. The little warning symbols are devices which haven't been installed. I think base system device is usually the chipstt driver.
 

connmal

Active member
Right, will do, I'll download all the drivers on to my back up usb and go from there. I'll let you know once its done. Thanks for all the help I really appreciate
it.
 

Scott

Behold The Ford Mondeo
Moderator
As above, none of the chipset drivers are installed which will cause no end of issues.

Wipe drive entirely
Install Win 10
Install chipset drivers
Install Control Panel
Install Nvidia GPU drivers
Check repeatedly for updates, rebooting as required after each attempt
Download & install 3DMark
Download & install HWMonitor
Open HWMonitor
Run Firestrike

That gives us a good base to take any trouble shooting further.
 

SpyderTracks

We love you Ukraine
Right so fresh install and just ran 3D mark with HW monitor. Looks like no temperature issues but still having issues with bad physics fps. Definitely an improvement nonetheless. https://www.3dmark.com/3dm/70397012?
Where did you source the graphics drivers? Is control center installed? Are all drivers accounted for in device manager?

Could you take a screenshot of your Windows update page?
 

connmal

Active member
Sourced all drivers from pc specialist site. And it seems like all devices are accounted for on the device manager. Here is a screen shot. Also with the windows update page
 

Attachments

  • windows update.png
    windows update.png
    669.6 KB · Views: 142
  • device manager 1.png
    device manager 1.png
    649.2 KB · Views: 141
  • device manager 2.png
    device manager 2.png
    899 KB · Views: 142

connmal

Active member
And a caveat I did change the processor to run at faster speeds idly because when it was on the default setting it would often drop to 0.18Ghz at random intervals for a few moments it was just painfully slow. Found it runs smoother with the higher idle speed. Though if this is not something you recommend then of course I'll change it back.
 

barlew

Godlike
Sourced all drivers from pc specialist site. And it seems like all devices are accounted for on the device manager. Here is a screen shot. Also with the windows update page
I have never seen warning symbols against the CPU in device manager like that. And each time you run Fire Strike it throws warnings about your GPU.

*edit* - What does information box say when you double click on one of the CPU icons with the warning?
 
Last edited:

barlew

Godlike
And a caveat I did change the processor to run at faster speeds idly because when it was on the default setting it would often drop to 0.18Ghz at random intervals for a few moments it was just painfully slow. Found it runs smoother with the higher idle speed. Though if this is not something you recommend then of course I'll change it back.
What do you mean by this? Where did you make this change?
 

Scott

Behold The Ford Mondeo
Moderator
Something is very wrong with the setup of this system. I'm not sure what you could be doing that would cause this.

The power management appears to be messed up.

Have you touched any of the BIOS settings at all? Have you ran and put the Control Centre in performance mode?
 
Top